PREMagMPC™ Cement Components and PREMagMPC™ PGDM Cement by CPG

PREMagMPC™ PGDM is fully-formulated, high-performance, quick-set magnesium phosphate cement product. Material is formulated to be used in a wide variety of applications where moderate strength, quick-setting cement is used such as shotcrete, quick-patch mixes and repair mortars. PREMagMPC Part A materials when reacted in the appropriate proportions with PREMagMPC Part B form magnesium phosphate cement (MPC) when blended with water. MPC cements provide fast setting, strong, durable and environmentally friendly binder systems for a wide variety of construction products. For both internal and external applications.

 

PREMagMPC™ cement components

 

PREMagMPC – PART A when reacted in the proper proportions with PREMagMPC – PART B forms magnesium phosphate cement (MPC) when blended with water. MC cements provide strong and durable binder systems for a wide variety of construction products for both internal and external use. This binder system sets very quickly, gains strength quickly and binds tenaciously with a wide variety of substrates such as concrete, metals, wallboard, asphalt and wood making it an ideal material for quick-setting mixes and mortars, and shotcrete applications.
Benefits of PREMagMPC Cements:

  • Greener/sustainable technology
  • Very fast-setting
  • Extremely high early compressive and tensile strengths
  • Low shrinkage properties/little to no shrinkage cracking
  • Fire resistant and non-combustible
  • Mold, Bacteria and Insect Resistant
  • Abrasion and wear resistant
  • Impact, indentation and scratch resistant
  • Acid and alkali chemical resistant
  • Low electrical conductivity
  • Oil, grease and solvent resistant
  • Improved thermal conductivity
  • Lightweight
  • Resilient
  • Excellent bonding
  • Cost-effective

 

 



PREMagMPC™ PGDM cement

 

PREMagMPC PGDM is a fully formulated rapid setting cement that was designed for use in shotcrete applications and quick-setting patching material. The material is ready-to-use, just add water at a ratio of 30-35% of the mix weight, e.g. for each 100 lbs of PREMagMPC PGDM add 30-35 lbs of water. Material will harden in 15-30 minutes, much shorter when shotcreted. This cement is non-shrinking and will bind to a wide variety of substrates proving protection against acid attack, fire and mold.

Follow

Contact Details

Leave a comment

Or register to be able to comment.